Die Datei config.bin:

Man erhält sie, indem man die erzeugte config.bin durch uudecode laufen läßt (manuell zuvor einen passenden Header einfügen)

zurück geht mit uuencode -m

<psitree>

<TecomVoipCfg>

<emergency emg_number0="110" emg_desc0="Polizei" emg_number1="112" emg_desc1="Feuerwehr" emg_number2="19222" emg_desc2="Rettungsdienst" emg_number3="" emg_desc3="" emg_number4="" emg_desc4="" emg_number5="" emg_desc5="" emg_number6="" emg_desc6="" emg_number7="" emg_desc7="" emg_number8="" emg_desc8="" emg_number9="" emg_desc9=""/>

<portInfo pri_select="2" sec_select="2" numberHide="disable" enable_CLIP="enable" enable_Anklopfen="disable" enable_Analog="disable" enable_Fallback="disable" />

<provName providerName="TONLINE"/>

<partialTbl tableSize="5">

<partialEntry id="1" partial="0137" nselect="pstn" />

<partialEntry id="2" partial="0180" nselect="pstn" />

<partialEntry id="3" partial="0190" nselect="pstn" />

<partialEntry id="4" partial="0800" nselect="pstn" />

<partialEntry id="5" partial="0900" nselect="pstn" />

</partialTbl>

</TecomVoipCfg>

<AtmCfg>

<initCfg structureId="2" threadPriority="25" freeCellQSize="10" freePktQSize="200" freePktQBufSize="1600" freePktQBufOffset="32" rxCellQSize="10" rxPktQSize="200" txFifoPriority="64" aal5MaxSduLen="64" aal2MaxSduLen="0"/>

</AtmCfg>

<AtmCfgTd>

<td1 cat="UBR" PCR="0" SCR="0" MBS="0"/>

</AtmCfgTd>

<SecCfg>

<srvCtrlList ftp="disable" http="enable" icmp="lan" ssh="enable" telnet="enable" tftp="disable"/>

• Hier haben änderungen nichts genutzt, es gibt immer noch kein ssh / Telnet

<accCtrlMode state="enable"/>

</SecCfg>

<WirelessCfg>

<wlVars state="enabled" hide="1" ssId="WLAN" country="DE" authMode="open" IdleTimeout="180" authRenewIntvl="3600" authBlockoutIntvl="60" NASId="" mix_NASId="" radiusServerIP="0.0.0.0" radiusServerPort="1812" radiusServerKey="" mix_radiusServerIP="0.0.0.0" mix_radiusPort="1812" mix_radiusKey="" enblRadius="0" enblInternal="1" wep="disabled" keyBit="64-bit" keyMode="ASCII" key64_1="" key64_2="" key64_3="" key64_4="" key64Index="0" key128_1="" key128_2="" key128_3="" key128_4="" key128Index="0" wpaRekey="0" wpakey="" mix_wpakey= "" wpa="tkip" fltMacMode="disabled" apMode="ap" bridgeRestrict="enabled_scan" wdsMAC_0="" wdsMAC_1="" wdsMAC_2="" wdsMAC_3="" apIsolation="off" band="b" channel="11" transPowerPercent="100" basicSpeed="0" wlRepeaterEnbl="disabled" rate="auto" multicastRate="auto" basicRate="all" fragThreshold="2346" RTSThreshold="2347" DTIM="1" beacon="100" XPress="off" gMode="auto" gProtection="auto" preamble="long" AfterBurner="off" WME="off" WMENoAck="off" Preauthentication="off" ReauthTimeout="36000"/>

</WirelessCfg>

<SystemInfo>

<sysUserName value="admin"/>

<protocol autoScan="disable" upnp="disable" pppThrough="disable" macFilterPolicy="forward" encodePassword="enable" enetwan="disable"/>

</SystemInfo>

<RouteCfg>

<ripGlobal state="disable" ripIfcTableSize="1"/>

<ripIfc tableSize="1">

<ripIfcEntry id="1" name="br0" state="disable" version="2" operation="active"/>

</ripIfc>

</RouteCfg>

<AtmCfgVcc>

<vccId1 vpi="1" vci="32" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="enable"/>

</AtmCfgVcc>

<Lan>

<entry1 routerName="Speedport W 500V" address="192.168.0.3" mask="255.255.255.0" dhcpServer="enable" leasedTime="960" startAddr="192.168.0.32" endAddr="192.168.0.63"/>

</Lan>

<ADSL/>

<BudgetCfg/>

<URLFilterCfg/>

<FWScheduleCfg/>

<TCM_SYSINFO_CFG>

<tecomSysInfo enblFirewall="disable" enblNat="enble" enblStdSrv="disable" stdSrvAddr="2"/></TCM_SYSINFO_CFG>

<SpiCfg/>

<DDNSCfg/>

<SNTPCfg/>

<ToDCfg/>

<DatetimeCfg/>

<wan_1_32/>